-
- HEAVY DUTY TITE-GRIP WATER PIPE STRAP
- #117 – 12” Tite-Grip Strap
- #117 - 12” Tite-Grip Strap for pipes up to 2”. Wt. .42 lb. ea. #117A - 18” Tite-Grip Strap for pipes up to 4”. Wt. 1.21 lb. ea. #117B - 32” Tite-Grip Strap for pipes up to 8”. Wt. 1.70 lb. ea. Note: Shape strap snugly around pipe until casting will slide within approximately 1/8” of pipe, then tighten screw…
- Read more
-
- HEAVY DUTY TITE-GRIP WATER PIPE STRAP
- #117C – Bronze Clamp Only. Wt. .58 lb. ea. *
- #117C - Bronze Clamp Only. Wt. .58 lb. ea. *
- Read more
-
- BAND AND STRAP CONNECTORS
- #118 – Vent Pipe Bonding Strap
- #118 - Vent Pipe Bonding Strap, for 2”, 3” and 4” soil pipe. Cable connection for standard cables. Made of soft copper, tinned. Wt. .42 lb. ea. #A118 - Same as above only in aluminum. Wt. .20 lb. ea.
- Read more
-
- BAND AND STRAP CONNECTORS
- #118X – Copper Vent Pipe Bonding Connector
- #118X - Copper Vent Pipe Bonding Connector, for 2”, 3” and 4” diameter pipes. Clamp type cable connector. made of soft copper, tinned. Wt. .80 lb. ea. #A118X - Same as above only in aluminum. Wt. .30 lb. ea.
- Read more
-
- CONNECTORS, SPLICERS, FITTINGS, BONDING PLATES, ETC.
- #119 – Bronze Cross Run Clamp
- #119 - Bronze Cross Run Clamp for cross connecting standard cables up to 1/2” diameter. Wt. .40 lb. ea. * #A119 - Same as above only in aluminum. Wt. .14 lb. ea. * #119A - Bronze Cross Run Clamp. For use with cables or ground rods up to 5/8” diameter. Wt. .46 lb. ea. #A119A - Same as above only…
- Read more
-
- GROUND ROD CLAMPS
- #119B – Bronze Heavy Duty Cross Run Clamp.
- Clamp has four hex screws for cross-connecting 1/2” diameter cable to 5/8” or 3/4” diameter ground rods. Wt. .64 lb. ea.
- Read more
-
- BAND AND STRAP CONNECTORS
- #12 – Bonding Strap
- #12 - Bonding Strap for 1/2” to 1-1/2” pipes inclusive. Part is tinned. Wt. .42 lb. ea. *
- Read more
-
- SHEET METAL CONNECTORS
- #120 – Bronze Bonding Connector
- #120 - Bronze Bonding Connector for sheet metal and other applications. Furnished as tinned and for use with standard No. 2. cable. Wt. .22 lb. ea. * #A120 - Aluminum Bonding Connector. Same as above except part is not tinned. Wt. .10 lb. ea.
- Read more
-
- CONNECTORS, SPLICERS, FITTINGS, BONDING PLATES, ETC.
- #13 – Extension
- #13 - Extension for 2”, 2-1/2” and 3” pipes. made of soft copper strip, tinned. By using a series of extensions, with #12 part shown above, bonding strap is adjustable for larger pipes. Wt. .26 lb. ea.
- Read more
-
- CABLE GUARDS AND FASTENERS
- #135A – Poly “U” Guard Fastener
- #135A - Poly “U” Guard Fastener for use with 349P Polyurethane “U” Guard or for 3/4” PVC. Wt. .08 lb. ea
- Read more
-
- CABLE GUARDS AND FASTENERS
- #177 – Bronze Bonding Wedge
- #177 - Bronze Bonding Wedge for use when bonding standard cables through 2/0 to 1” diameter conduit. When conductors are run in conduit, recommended practice is that a bonding wedge is at both top and bottom of conduit. Wt. .26 lb. ea. #A177 - Aluminum Bonding Wedge. Wt. .08 lb. ea.
- Read more
-
- CABLE GUARDS AND FASTENERS
- #177X – 3/4” Copper Guard Bonding Wedge
- #177X - 3/4” Copper Guard Bonding Wedge for use when making metallic connection between 3/4” guard and copper cable. Wt. .04 lb. ea.
- Read more
-
- VERTICAL MOUNTED BASES
- #178 – Bronze Vertical Metal Point Connector
- with 1/2” inside thread 4 sq. inches of bonding surface for attaching point to side of metal angles, channel, canopy over swimming pool, boat, etc. Wt. .30 lb. ea. #A178 - Same as above only in aluminum. Wt. .10 lb. ea.
- Read more
-
- FLAT MOUNTED BASES
- #179 – Bronze Flat Metal Point Connector
- with 8 sq. inches of bonding surface. Has 3/8” inside and 5/8” outside threads. Wt. .42 lb. ea. #A179 - Aluminum with 5/8” outside thread. Wt. .14 lb. ea. #179A - Bronze Flat Metal Point Connector, same as above only with 1/2” inside thread. Wt. .40 lb. ea. #A179A - Aluminum with 1/2” inside thread. Wt. .12 lb. ea
- Read more
-
- GROUND ROD CLAMPS
- #180 – Ground Rod and Parallel Cable Clamp.
- #180 - Ground Rod and Parallel Cable Clamp. Made of Copper bronze, for clamping two standard cables through 2/0 to ground rod up to 3/4” diameter. Clamp type cable fasteners provide maximum strength. Wt. .98 lb. ea
- Read more
-
- FLAT MOUNTED BASES
- #181 – Bronze Railing Bracket
- with 5/8” outside and 3/8” inside threads with clamp style cable fastener. Fits up to 1-3/4” O.D. railing. Available with 3/8” inside thread upon request. Wt. .74 lb. ea. * #A181 - Aluminum with 5/8” outside thread. Wt. .28 lb. ea. #181A - Same as above with 1/2” inside thread. Wt. .74 lb. ea.* #A181A - Aluminum with 1/2” inside…
- Read more
-
- SIDE BY SIDE CONNECTORS AND SPLICERS
- #193A – Cast Copper Bronze Double Splicer
- #193A - Cast Copper Bronze Double Splicer for standard cables. 2” long. Wt. .16 lb. ea. #A193A - Aluminum Double Splicer for Standard Cable. Wt. .06 lb. ea. #193X - Cast Copper Bronze Double Splicer for standard and miniature cables. 2” long. Wt. .08 lb. ea. #A193X - Aluminum Double splicer for Standard and Miniature Cables. Wt. .06 lb. ea.
- Read more
-
- GROUND ROD CLAMPS
- #196 – Heavy Duty Ground Rod and Cross Cable Clamp.
- #196 - Heavy Duty Ground Rod and Cross Cable Clamp. Made of copper bronze with clamp type cable fastener 4” in length, fits all standard cables through 2/0. Clamp fits 5/8” ground rod. (Also furnished for 3/4” diameter ground rod when specified.). Wt. .86 lb. ea.
- Read more
-
- GROUND ROD CLAMPS
- #197- Bronze All Purpose Ground Rod and Cable Clamp
- #197- Bronze All Purpose Ground Rod and Cable Clamp used as cross run clamp. Will connect all sizes of ground rods up through 3/4” to one vertical cable or two horizontal cables. clamp fits standard cables up through 2/0. (Used for parallel or horizontal connections.) Wt. .60 lb. ea.
- Read more
-
- BAND AND STRAP CONNECTORS
- #214 – Band with Miniature Cable Attachment.
- #214 - Band with Miniature Cable Attachment. Band 8” long. Very soft and pliable. Used for bonding electric conduit, guy rods and other similar metal bodies. Wt. .22 lb. ea. #A214 - Aluminum Band with Miniature Cable Attachment. Wt. .08 lb. ea. #215 - Band with Standard Cable Attachment. Wt. .28 lb. ea. #A215 - Aluminum Band with Standard Cable…
- Read more
-
- MISCELLANEOUS CONNECTORS
- #216 – Parallel Cable and Section Rod Coupler.
- #216 - Parallel Cable and Section Rod Coupler. Wt. .42 lb. ea.
- Read more
-
- SHEET METAL CONNECTORS
- #219 – Bronze Metal Connector
- #219 - Bronze Metal Connector for standard No. 2 cable. Wt. .18 lb. ea. * #A219 - Aluminum Metal Connector. Wt. .06 lb. ea. *
- Read more
-
- FLAT MOUNTED BASES
- #230 Bronze Gravel Stop Point Base
- with 3/8” inside and 5/8” outside threads for fastening to gravel stop at roof edge. Wt. .02 lb. ea. #A230 - Aluminum with 5/8” outside threads. Wt. .28 lb. ea
- Read more
-
- FLAT MOUNTED BASES
- #231 – Bronze Gravel Stop Cable
- #231 - Bronze Gravel Stop Cable Clamp used for fastening to gravel stop at edge of roof. Wt. .16 lb. ea. #A231 - Aluminum Gravel Stop Cable Clamp. Wt. .06 lb.ea
- Read more
-
- CONNECTORS, SPLICERS, FITTINGS, BONDING PLATES, ETC.
- #235X – Bronze Heavy Duty Beam Flange Bonding Connector
- #235X - Bronze Heavy Duty Beam Flange Bonding Connector with 8 square inches of bonding surface. Ideal for bonding to flange of structural beams, columns and angles and steel purlins up to 3/4” thickness. Clamp type cable fastener fits all standard cables through 2/0. Requires no drilling, clamps direct to edge of steel. Wt. 1.60 lb. ea. #A235X - Same…
- Read more
-
- CONNECTORS, SPLICERS, FITTINGS, BONDING PLATES, ETC.
- #236 – Bronze Heavy Duty Metal Beam Connector
- #236 - Bronze Heavy Duty Metal Beam Connector with 8 sq. inches of bonding surface, with clamp type cable fastener for standard cables through 2/0. No drilling required, fits 4” to 6” beams. If required for larger beams, specify size. Size may be varied by using diffeerent length bolt. Bolt clip casting must be formed over edge of beam. Wt..98…
- Read more
-
- CONNECTORS, SPLICERS, FITTINGS, BONDING PLATES, ETC.
- #237 – Bronze Heavy Duty Angle Iron Connector
- #237 - Bronze Heavy Duty Angle Iron Connector with 8 square inches of bonding surface, with clamp type cable fastener for standard cables through 2/0. Bronze bolt clip must be formed over edge of beam. Fits 2” to 4” size angles. (Reverse bolt clip for 2” size). Connector fastens directly to metal, no drilling required. For larger beams, specify size…
- Read more
-
- CONNECTORS, SPLICERS, FITTINGS, BONDING PLATES, ETC.
- #238 – Bronze Heavy Duty Bonding Plate
- #238 - Bronze Heavy Duty Bonding Plate with 8 sq. inches of bonding surface. Fits up to 3/4” diameter bolt, for standard cables through2/0. Wt. .78 lb. ea. #A238 - Same as above only in aluminum. Wt. .26 lb. ea
- Read more
-
- CONNECTORS, SPLICERS, FITTINGS, BONDING PLATES, ETC.
- #238B – Bronze Heavy Duty 2 Screw metal Bonding Plate
- #238B - Bronze Heavy Duty 2 Screw metal Bonding Plate with clamp type cable fastener for all standard cables through 2/0. Affords 8 sq. inches of bonding surface. Wt. .66 lb. ea. * #A238B - Same as above only in aluminum. Wt. .22 lb. ea. *
- Read more
-
- CONCEALED THRU-ROOF ASSEMBLIES
- #240 – Bronze Concealed Base Assembly
- Assembly includes a 3/8” x 15” stem, neoprene washer, nailing bracket and cable connector. Wt. 1.02 lb. ea.
- Read more
-
- CONCEALED THRU-ROOF ASSEMBLIES
- #240U – Bronze Concealed Base Assembly
- This base is for use with air terminals that have 5/8” inside threads. See below. Assembly includes 3/8” x 15” stem of which top 6” is threaded, neoprene washer nut, 63Y adaptor and cable clamp. Wt. . 90 lb. ea. #A240U - Aluminum Concealed Base Assembly. Same as above description, except in aluminum. Wt. .48 lb. ea.
- Read more
-
- SADDLE BASE ASSEMBLY COMPLETE WITH AIR TERMINAL
- #242 – One piece Semi-Concealed Bracket and Air Terminal.
- 10”solid point made of copper bronze. Wt. .76 lb. ea.
- Read more
-
- SADDLE BASES
- #243 – Semi-Concealed Point Bracket
- #243 - Semi-Concealed Point Bracket, made of copper bronze with clamp type cable fastener with adjustable point fastener. Wt. 1.08 lb. ea. #A243 - Sames as above only in aluminum. Wt. .36 lb.ea.
- Read more
-
- FLAT MOUNTED BASES
- #244 – Bronze Heavy Duty Metal Beam Air Terminal
- #244 - Bronze Heavy Duty Metal Beam Air Terminal with 8 sq. inches of surface contact, 10” nickel tipped point and neoprene washer. Standard clamp fits 4” to 8” beam. Reverse bolt clip for 4” size. Standard length of stem 8”. (If clamp is requried for larger size beam or if a longer stem is required, please specify when ordering.)…
- Read more
-
- SADDLE BASES
- #245 – Copper Adjustable EZ-Fit Saddle
- #245 - Copper Adjustable EZ-Fit Saddle with adjustable clamp type cable fastener. Wt. .92 lb. ea. #A245 - Same as above only in aluminum. Wt. .38 lb. ea.
- Read more
-
- SADDLE BASES
- #245X – Copper Roof Edge Saddle
- 12” long, 5/8” outside thread, with adjustable clamp type cable fastener. Point and cable fasteners are made of copper bronze. This saddle is designed especially for roof edges and flat roof dormers. Wt. .02 lb. ea. #A245X - Same as above only in aluminum. Wt. .38 lb. ea.
- Read more
-
- SIDE BY SIDE CONNECTORS AND SPLICERS
- #25G – Bronze Small 1” All Purpose Connector
- #25G - Bronze Small 1” All Purpose Connector with bolt, nut and washer for connecting two cables through 2/0. Adjusts to various size cables. Wt. .28 lb. ea. #A25G - Aluminum Small 1” All Purpose Connector. Wt. .14 lb. ea
- Read more
-
- VERTICAL MOUNTED BASES
- #260 – Bronze Heavy Duty Straight Connector
- with 1/2” inside thread and two set screw cable clamp. (May be furnished with 5/8” inside thread when specified.) Wt. .54 lb. ea. * #A260 - Same as above only in aluminum. Wt. .20 lb. ea
- Read more
-
- VERTICAL MOUNTED BASES
- #261 – Bronze Heavy Duty “T”: Connector
- with 1/2” inside thread and 4-screw clamp type cable connector. 5/8” inside thread available upon request. Wt. .82 lb. ea. #A261 - Aluminum with 1/2” inside thread. Wt. .28 lb. ea
- Read more
-
- “T” TYPE CABLE CONNECTORS
- #262 Copper Bronze “T” Splicer
- #262 Copper Bronze “T” Splicer for standard cables. Gripping strength is 500 lbs. Wt. .22 lb. ea. #A262 - Aluminum “T” Splicer. Wt. .12 lb. ea.
- Read more
-
- “T” TYPE CABLE CONNECTORS
- #262DS – Standard “T” Splicer
- #262DS - Standard “T” Splicer made of pressed copper. 3” wide by 4” long. Wt. .15 lb. ea. * #A262DS - Aluminum “T” Splicer. Wt. .06 lb. ea. *
- Read more
-
- PAN-TYPE BASE
- #266B – No Nail Bronze Pan-Type Air Terminal and Cable Fastener Base.
- #266B - No Nail Bronze Pan-Type Air Terminal and Cable Fastener Base. Threads are 5/8” O.D. Base is fastened to roof with adhesive and then filled with stone, chips or concrete. Overall dia. is 4” and inside dia. of the pan is approximately 3-1/2”. Wt. 2.90 lb. ea. #A266B - No Nail Aluminum Pan-type Air Terminal and Cable Fastener Base.…
- Read more
-
- VERTICAL MOUNTED BASES
- #271 – Bronze Vertical Mount 3/8” Rod and Finger Type Cable Fastener
- #271 - Bronze Vertical Mount 3/8” Rod and Finger Type Cable Fastener with set screw. For notched rod. Wt. .22 lb. ea. #271A - Same as above, for threaded rod. Wt. .22 lb. ea.
- Read more
-
- THRU-ROOF CABLE CONNECTORS
- #272A – Thru-Roof Cable Connector
- #272A - Thru-Roof Cable Connector #272A - Thru-Roof Cable Connector, made of copper bronze with swivel cable connector on both ends, complete with washer, hex nut and lead seal washer with threaded stem to fit roof up to 2-1/2” thick. Wt. .76 lb. ea. #A272A - Aluminum Thru-Roof Cable Connector. Wt. .46 lb. ea.
- Read more
-
- OTHER CONNECTORS
- #272W – Bronze Thru-Wall Connector
- #272W - Bronze Thru-Wall Connector consists of 3/8” x 12” copper stem and two adjustable clamp type cable fasteners. Fits up to 10” thick wall. Longer stems can be furnished when specified. Wt. 1.16 lb. ea. #272X - Bronze Thru-Wall Connector as 272W but stem is 1/2” x 12”. Wt. 1.80 lb. ea.* #A272X - Aluminum Thru-Wall Connector consists of…
- Read more
-
- VERTICAL MOUNTED BASES
- #273 – Bronze Off-set Point Support
- #273 - Bronze Off-set Point Support with 1/2” inside thread. Wt. .76 lb. ea.* #A273 - Aluminum with 1/2” inside thread. Wt. .25 lb. ea. #274 - Same as above with3/8” inside and 5/8” outside threads. Wt. .76 lb. ea. * #A274 - Aluminum with 5/8” outside thread. Wt. .24 lb. ea. * Off-set bases are off-set approximately 2”. Clamp…
- Read more
-
- SADDLE BASE ASSEMBLY COMPLETE WITH AIR TERMINAL
- #276 – Bronze Concealed Saddle Top
- with 10” nickle plated air terminal (240A), 3” long threaded stem, stainless steel nut and washer, neoprene washer and saddle. Wt. .48 lb. ea. #A276 - Same as above only in aluminum. Wt. .20 lb. ea
- Read more
-
- MISCELLANEOUS CONNECTORS
- #283 – Straight Connector
- #283 - Straight Connector for 1” Strip and Cable. Made of copper bronze. Wt. .26 lb. ea. #A283 - Aluminum Straight Connector for 1: Strip and Cable. Wt. .08 lb. ea.
- Read more
-
- MISCELLANEOUS CONNECTORS
- #283R – Right Angle Connector
- #283R - Right Angle Connector for 1” strip and cable. Made of copper bronze. Wt. .28 lb. ea. #A283R - Aluminum Right Angle Connector for 1” Strip and Cable. Wt. .08 lb. ea.
- Read more
-
- MISCELLANEOUS CONNECTORS
- #28U – Bronze 2” All Purpose U Bolt Clamp
- Grounding to Counterpoise System #28U - Bronze 2” All Purpose U Bolt Clamp. This part is used in conjunction with ground rod clamps for connecting to counterpoise ground systems. May be used for one or two horizontal cables through 2/0 and to rod up to 3/4” diameter. Clamp adjusts to various size cables and includes stainless steel nuts and washers.…
- Read more
-
- MISCELLANEOUS CONNECTORS
- #29 – Straight Connector
- #29 - Straight Connector for splicing broken ends of section rod. Made of cast aluminum. Wt. .28 lb. ea.
- Read more
-
- BI-METAL CONNECTORS
- #290 – Small Bimetal Straight Splicer
- It is very important when interconnecting aluminum and copper cables, that properly approved connectors be used to eliminate corrosion. An electro-chemical reaction will appear and corrosion will take place when these two dissimilar metals are in contact with each other, unless there is a sealed joint that will not permit moisture to enter. The connectors and splicers illustrated provide a…
- Read more
-
- SIDE BY SIDE CONNECTORS AND SPLICERS
- #296 – Bronze Large Heavy Duty all Purpose Connector
- #296 - Bronze Large Heavy Duty all Purpose Connector, with two 3/8” stainless steel bolts, nuts and washers for connecting two cables or rods through 250m circular mils or 3/4” diameter. Wt. .80 lbs. ea. #A296 - Aluminum Large heavy Duty All Purpose Clamp. Wt. .38 lb. ea.
- Read more
-
- SIDE BY SIDE CONNECTORS AND SPLICERS
- #297 – Bronze Small Many Purpose Clamp
- #297 - Bronze Small Many Purpose Clamp for connecting No. 4 or No. 6 wires or cables to round guy wires, floor mesh, metallic braces, etc. Wt. .16 lbs. ea. * #A297 - Aluminum Small Many Purpose Clamp. Wt. .08 lb. ea.
- Read more
-
- SIDE BY SIDE CONNECTORS AND SPLICERS
- #297A – Bronze Large Many Purpose Clamp
- #297A - Bronze Large Many Purpose Clamp heavy duty, for clamping two standard cables through 2/0 and/or 1/2” and 5/8” rods. 2” long. Wt. .38 lb. ea.* #A297A - Aluminum Large Many Purpose Clamp. Wt. .14 lb. ea.*
- Read more
-
- CONNECTORS, SPLICERS, FITTINGS, BONDING PLATES, ETC.
- #298 – Bronze Small Cable and Flat Iron Clamp
- #298 - Bronze Small Cable and Flat Iron Clamp for connecting No. 4 and No. 6 wire or cables to flat metal tracks, supports, flashings, etc. Wt. .18 lb. ea. * #A298 - Same as above only in aluminum. Wt. .08 lb. ea. *
- Read more
-
- CONNECTORS, SPLICERS, FITTINGS, BONDING PLATES, ETC.
- #298A – Bronze Large Cable and Flat Iron Clamp
- #298A - Bronze Large Cable and Flat Iron Clamp for connecting standard cable through 2/0 to angle iron, I Beams and flat iron strips. Also services as cable holder on I beams. Wt. .40 lb. ea. * #A298A - Same as above only in aluminum. Wt. .16 lb.ea. *
- Read more
-
- “T” TYPE CABLE CONNECTORS
- #3 – Copper Bronze “T” Splicer
- #3 - Copper Bronze “T” Splicer for connecting miniature cable to standard cable - cast. Wt. .10 lb. ea. #A3 - Aluminum “T” Splicer. Wt. .08 lb. ea
- Read more
-
- SHEET METAL CONNECTORS
- #300 – Copper Sill Cock Connector
- Sill Cock Connector This connector can be fitted to standard sill cocks. It is not necessary to shut off water or remove any pipe connections - simply clamp connector on flange and hammer over fingers. With our sill cock connector, it is possible to attach miniature and standard cable fittings, also 1/2” and 1” copper strip. You will find that…
- Read more
-
- END TO END STRAIGHT CONNECTORS
- #303 – Bronze Pressure
- #303 - Bronze Pressure Type Straight Cable Splicer for connecting cables through 2/0. furnished complete with stainless steel hex bolts and washers. Bolt type cable action offers maximum strength. Wt. .58 lb. ea. * #A303 - Aluminum Pressure Type Straight Cable Splicer. Wt. .20 lb. ea. #303X - Bronze Disconnector. Part is a modified version of 303. Disconnector is drilled…
- Read more
-
- “T” TYPE CABLE CONNECTORS
- #304 – Bronze Pressure Type “T”
- #304 - Bronze Pressure Type “T” Cable Splicer for clamping standard cables through 2/0. Furnished complete with two stanless steel hex bolts. Bolt type cable action offers maximum strengtth. Wt. .52 lb. ea. * #A304 - Aluminum Pressure Type “T” Cable Splicer. Wt. .18 lb. ea.
- Read more
-
- MISCELLANEOUS CONNECTORS
- #305 – “T” Connector for Copper Cable and No. 6 Copper Wire.
- #305 - “T” Connector for Copper Cable and No. 6 Copper Wire. Wt. .14 lb. ea. * #A305 - Aluminum “T”: Connector for Cable and No. 4 Wire. Wt. .04 lb. ea.
- Read more
-
- MISCELLANEOUS CONNECTORS
- #305X – Straight Connector for No. 6 Wire and Copper Strip
- #305X - Straight Connector for No. 6 Wire and Copper Strip. Wt. .14 lb. ea. #A305X - Aluminum Straight Connector for Strip and No. 4 Wire. Wt. .04 lb. ea.
- Read more
-
- WATER PIPE CLAMPS
- #306 – Bronze Perfection Pipe Clamp
- Water pipe clamps are easy to install. Caps have slotted holes so it is not necessary to remove screws. When tightened, the clamp grips both the cable and pipe. Bronze clamps are manufactured of special copper and are tinned to prevent corrosion. Clamps are very sturdy and durable. #306 - Bronze Perfection Pipe Clamp. Clamp type cable fastener, fits all…
- Read more
-
- WATER PIPE CLAMPS
- #306A – Bronze Large Perfection Pipe Clamp
- Water pipe clamps are easy to install. Caps have slotted holes so it is not necessary to remove screws. When tightened, the clamp grips both the cable and pipe. Bronze clamps are manufactured of special copper and are tinned to prevent corrosion. Clamps are very sturdy and durable. #306A - Bronze Large Perfection Pipe Clamp with clamp type cable fastener…
- Read more
-
- WATER PIPE CLAMPS
- #306B – Bronze Extra Large Perfection Pipe Clamp
- Water pipe clamps are easy to install. Caps have slotted holes so it is not necessary to remove screws. When tightened, the clamp grips both the cable and pipe. Bronze clamps are manufactured of special copper and are tinned to prevent corrosion. Clamps are very sturdy and durable. #306B - Bronze Extra Large Perfection Pipe Clamp with clamp type…
- Read more
-
- BI-METAL CONNECTORS
- #306CX – Small Copper Pipe Clamp
- It is very important when interconnecting aluminum and copper cables, that properly approved connectors be used to elinimate corrosion. An electro-chemical reaction will appear and corrosion will take place when these two dissimilar metals are in contact with each other, unless there is a sealed joint that will not permit moisture to enter. The connectors and splicers illustrated provide a…
- Read more
-
- MISCELLANEOUS CONNECTORS
- #307X – Copper Connector for 1” Strip
- Grip Tite Connectors #307X - Copper Connector for 1” Strip. Wt. .14 lb. ea. * #A307X - Aluminum Connector for 1” Strip. Wt. .06 lb. ea.
- Read more
-
- MISCELLANEOUS CONNECTORS
- #308 – Copper Connector for 1” Strip and Standard Cable
- Grip Tite Connectors #308 - Copper Connector for 1” Strip and Standard Cable. Wt. .28 lb. ea. * #A308 - Aluminum Connector for 1” Strip and Standard Cable. Wt. .14 lb. ea. Note: These connectors are far more satisfactory than plain bolt type connections. Bolt breakage, due to expansion and contraction, is eliminated. It is not necessary to punch holes…
- Read more
-
- GROUND FLOOR RECEPTACLES
- #310 – Bronze Floor Ground Receptacle
- #310 - Bronze Floor Ground Receptacle of heavy duty construction, with clamp type cable fastener for connecting one or two standard cables through 2/0 to ground rod. When ordering, please specify diameter and whether ground rod is threaded or plain. Wt. 2.72 lb. ea.
- Read more
-
- GROUND FLOOR RECEPTACLES
- #311 – Bronze Floor Ground Receptacle
- #311 - Bronze Floor Ground Receptacle of heavy duty construction. Receptacle furnished for all size ground rods, 1/2”, 5/8” and 3/4” either plain or threaded. When ordering, please specify diameter and whether ground rod is threaded or plain. Wt. 2.22 lb. ea.
- Read more
-
- THRU-ROOF CABLE CONNECTORS
- #325 – Bronze Feed Thru-Roof Connector
- #325 - Bronze Feed Thru-Roof Connector with clamp type cable fastener furnished with two wood screws. Cable fastens underneath with finger type clamp and is fed down through roof or overhang. Underside is recessed and can be filled with plastic roof cement to afford perfect, weather tight seal. Wt. .72 lb. ea. #A325 - Aluminum Feed-Thru-Roof Connector. Wt. .24 lb.…
- Read more
-
- THRU-ROOF CABLE CONNECTORS
- #326 – Bronze Feed Thru-Roof Connector
- #326 - Bronze Feed Thru-Roof Connector #326 - Bronze Feed Thru-Roof Connector with ball and socket swivel for easy adjustment to roof pitch (no greater then 5/12 roof pitch). 3” length threaded stem with hex nut and washer, two wood screws and clamp type cable connector. Underside is recessed and can be filled with plastic roof cement to afford perfect…
- Read more
-
- FLAT MOUNTED BASES
- #336 – Bronze Heavy Duty Base
- with adjustable point fastener with 3/8” inside and 5/8” outside threads. Wt. 1.75 lb. ea. #A336 - Aluminum with 5/8” outside thread. Wt. .64 lb. ea. #337 - Bronze Heavy Duty Base with adjustable point fastener with 1/2” inside thread. Wt. 1.75 lb. ea. #A337 - Aluminum 1/2” inside thread. Wt. .64 lb. ea.
- Read more
-
- FLAT MOUNTED BASES
- #338 – Bronze Heavy Duty Adjustable Base
- with adjustable point fastener with 3/8” inside and 5/8” outside threads. Wt. 1.55 lb. ea. #A338 - Aluminum with 5/8” outside thread. Wt. .64 lb. ea. #339 - Same as above with 1/2” inside thread. Wt. 1.55 lb. ea. #A339 - Aluminum with 1/2” inside thread. Wt. .64 lb. ea
- Read more
-
- Uncategorized
- #33L – Standard Straight Splicer
- #33L - Standard Straight Splicer. Made of pressed copper. Gripping strength 260 pounds. 3-3/4” long. Wt. .10 lb. ea. #A33L - Aluminum Standard Straight Splcer. Wt. .04 lb. ea.
- Read more
-
- END TO END STRAIGHT CONNECTORS
- #33SDS – Standard Straight Splicer
- #33SDS - Standard Straight Splicer. Made of pressed copper. 6” long. Wt. .16 lb. ea. * #A33SDS - Aluminum Standard Straight Splicer. Made of pressed aluminum. 6” long. Wt. .06 lb. ea. *
- Read more
-
- END TO END STRAIGHT CONNECTORS
- #33X – Straight Splicer for standard cables
- #33X - Straight Splicer for standard cables. Part is cast of copper bronze. Gripping strength is 500 pounds. 4-1/2” long. Wt. .20 lb. ea. #A33X - Aluminum Straight Splicer - Cast. Wt. .08 lb. ea.
- Read more
-
- OTHER CONNECTORS
- #343 – Bronze Pitch Pocket
- #343 - Bronze Pitch Pocket, 5” square, 2” deep, with 1-3/4” square center hole. Used on flat roof. Center section is filled with pitch. Makes a permanent, water tight thru-roof connection. Wt. 1.50 lb. ea. #A343 - Aluminum Pitch Pocket. Wt. .38 lb. ea #343C - Copper Sheet Pitch Pocket, 12” square, made of 16 oz. copper with an approximate…
- Read more
-
- BUS TERMINALS
- #347 – Bronze Heavy Duty Bus Terminal
- #347 - Bronze Heavy Duty Bus Terminal with 6” of surface contact for connecting two cables up to 4/0 size or 5/8” dia. to metal surfaces. Hole diameter are for 1/2” bolts. Cable fastener is two bolt style. Wt. 1.12 lb. ea. #A347 - Aluminum Heavy Duty Bus Terminal. Wt. .46 lb. ea.
- Read more
-
- CABLE GUARDS AND FASTENERS
- #349P – Polyurethane “U” Guard.
- #349P - Polyurethane “U” Guard. Guard may be painted to desired colour. For cables through 2/0. Wt. .68 lb. ea.
- Read more
-
- “T” TYPE CABLE CONNECTORS
- #34L – Standard “T” Splicer
- #34L - Standard “T” Splicer made of pressed copper. Gripping strength 260 pounds. 2” wide x 2-1/2” long. Wt. .12 lb. ea. * #A34L - Aluminum Standard “T” Splicer. Wt. .04 lb. ea.
- Read more
-
- END TO END STRAIGHT CONNECTORS
- #3X – Straight Splicer for miniature cable
- #3X - Straight Splicer for miniature cable. Part is cast of copper bronze. 3” long. Wt. .06 lb. ea. #A3X - Aluminum Miniature Straight Splicer - Cast. Wt. .04 lb. ea.
- Read more
-
- SADDLE BASES
- #55 – Copper Tile Roof Point Base
- with 6” in length clamp type cable fastener. Wt. .48 lb. ea. #A55 - Same as above only in aluminum. Wt. .20 lb. ea.
- Read more
-
- SADDLE BASES
- #57A – Bronze Improved Perfect-Fit Point Bracket.
- 28” overall length. For use on tile, asbestos, and slate roof and coping. Centre part made of cast bronze with clamp type cable fastener. Ends made of 1” pliable copper strip and can be cut to desired length and easily shaped to tile. Larger extensions furnished upon request. Wt. 1.10 lb. ea. #A57A - Same as above only in aluminum.…
- Read more
-
- GROUND PLATES AND CHARCOAL GROUNDS
- #583 – Copper Charcoal Ground
- #583 - Copper Charcoal Ground. 4” dia. x 24” tube filled with charcoal. Wt. 10.72 lb. ea. #583X - Perforated Copper Charcoal Ground. Same as above but has perforated tube. Wt. 7.60 lb. ea. Additional chemicals such as magnesium sulfate will improve or lower ground resistance even further.
- Read more
-
- GROUND PLATES AND CHARCOAL GROUNDS
- #584 – Large Length Four Wing Ground Plate.
- Each wing is 3-1/2” wide, 18” long. Made of 20 ga. copper. Wt. 3.46 lb. ea.
- Read more
-
- GROUND PLATES AND CHARCOAL GROUNDS
- #585 – Small Length Four Wing Ground Plate.
- #585 - Small Length Four Wing Ground Plate. Each wing is 6” wide, 9” long. Made of 20 ga. copper. Wt. 2.66 lb. ea
- Read more
-
- GROUND PLATES AND CHARCOAL GROUNDS
- #586 – Copper Bronze Ground Plate
- #586 - Copper Bronze Ground Plate 12” x 12” x 1/4” thick. Wt. 13.28 lb. ea. #586X - Copper Bronze Ground Plate 12” x 12” x 1/2” thick. Wt. 20.68 lb. ea.
- Read more
-
- CABLE GUARDS AND FASTENERS
- #591 – Copper Guard Pipe.
- #591 - Copper Guard Pipe. Guard is 3/4” O.D. by 8’ long. Fits standard cables through 2/0. Wt. 4.26 lb. ea.
- Read more
-
- CONNECTORS, SPLICERS, FITTINGS, BONDING PLATES, ETC.
- #596 – Bronze Bus Terminal Metal Connector
- #596 - Bronze Bus Terminal Metal Connector with clamp type cable fastener for standard cables through 2/0. Fits over 1/2” bolt, forlarger size bolt specify when ordering. Clamp has 5 sq. inches of bonding surface. Wt. .54 lb. ea. * #A596 - Aluminum Bus Terminal metal Connector. Wt. .18 lb. ea.
- Read more
-
- BUS TERMINALS
- #596A- Bronze Extra Heavy Bus Terminal
- #596A- Bronze Extra Heavy Bus Terminal. 3 sq. inches of surface contact, for connecting 4/0 size cable to columns or larger metal bodies. Specify cable size when ordering. Standard hole size for 1/2” bolt but furnished for larger bolt when specified. Wt. .68 lb. ea. #A596A - Aluminum Extra Heavy Bus Terminal. Wt. .24 lb. ea.
- Read more
-
- THRU-ROOF CABLE CONNECTORS
- #597 – Bronze Straight Thru-Roof Connector
- #597 - Bronze Straight Thru-Roof Connector consists of top and bottom cable connector, neoprene washer, hex nut and bottom washer, 1/2” x 8” threaded stem. Fits up to 6” thick roof. If longer stem is required, specify when ordering. Wt. 1.10 lb. ea. #A597 - Aluminum Straight Thru-Roof Connector. Wt. .68 lb. ea.
- Read more
-
- OTHER CONNECTORS
- #597 Bottom Only – Copper Connector
- #597 Bottom Only - Copper Connector used in thru-roof air terminal installations. Available with set screws or hex-head screws. Please specify when ordering. Wt. .26 lb. ea. *(hex-head stocked) #A597 Bottom Only - Aluminum Connector. Wt. .08 lb. ea
- Read more
-
- OTHER CONNECTORS
- #597A – Bronze 1” PVC Cap only
- #597A - Bronze 1” PVC Cap only. Wt. .60 lb. ea. #A597A - Aluminum 1” PVC Cap only. Wt. .18 lb. ea. #597B - Bronze 1-1/4” PVC Cap only. Wt. .68 lb. ea. #A597B - Aluminum 1-1/4” PVC Cap only. Wt. .22 lb. ea
- Read more
-
- THRU-ROOF CABLE CONNECTORS
- #597C – Bronze Thru-Roof 1” PVC Conduit Connector
- #597C - Bronze Thru-Roof 1” PVC Conduit Connector, consists of top bronze cable connector, 1/2” x 8” length threaded stem, two 1/2” stainless steel nuts, washers and bottom bronze cable connector. Wt. 1.82 lb. ea. #A597C - Aluminum Thru-Roof 1” PVC Conduit Connector. Wt. .92 lb. ea. #597D - Bronze Thru-Roof 1-1/4” PVC Conduit Connector, complete as described above. Wt.…
- Read more
-
- THRU-ROOF CABLE CONNECTORS
- #597R- Bronze Right Angle Thru-Roof Connector
- #597R- Bronze Right Angle Thru-Roof Connector consists of bolt type top cable connector, bronze and neoprene washer, 1/2” x 8” threaded stem, hex nut and washer and bronze bottom connector. Fits up to 6” roof thickness. If required for thicker roof, specify when ordering. Wt. 1.30 lb. ea. * #A597R - Aluminum Right Angle Thru-Roof Connector. Wt. .74 lb. ea.
- Read more
-
- THRU-ROOF CABLE CONNECTORS
- #597X – Bronze Right Angle Thru-Roof Connector
- #597X - Bronze Right Angle Thru-Roof Connector consists of clamp type top cable connector, 4” square roof flashing plate, 1/2” x 8” threaded stem, hex nut and washer, and adjustable bottom clamp. Fits up to 6” roof thickness. If required for thicker roof, specify when ordering. Wt. 2.04 lb. ea. #A597X - Aluminum Right Angle thru-Roof Connector. Wt. 1.10 lb.…
- Read more
-
- MISCELLANEOUS CONNECTORS
- #6 – 5/8” Strip and Track or Metal Connector
- 5/8” Strip and Flat Cable Connectors #6 - 5/8” Strip and Track or Metal Connector. Wt. .10 lb. ea. #A6 - Aluminum 5/8” Strip and Track or Metal Connector. Wt. .04 lb. ea.
- Read more
-
- FLAT MOUNTED BASES
- #60 – Bronze Flat Surface Point Base
- with 3/8” inside and 5/8” outside threads with clamp type cable fastener. Wt. .64 lb. ea. * #A60 - Aluminum Base with 5/8” outside threads only. Wt. .22 lb. ea.
- Read more
-
- FLAT MOUNTED BASES
- #60A – Bronze Flat Surface Point Base
- with 5/8” outside and 3/8” inside threads with 5/16” lead anchor and screw. The base requires only one anchor for fastening. Wt. .68 lb. ea. #A60A - Same as above only in aluminum. Wt. .28 lb. ea.
- Read more
-
- FLAT MOUNTED BASES
- #60B – Bronze Flat Surface Point Base
- with 1/2” inside thread with clamp type fastener. Wt. .64 lb.. ea. * #A60B - Same as above only in aluminum. Wt. .22 lb. ea.*
- Read more
-
- FLAT MOUNTED BASES
- #60SS – Bronze Base for Standing Seam Metal Roof.
- Cable can be run parallel or perpendicular to seam. No penetration of roofing seam required. 5/8” outside and 3/8” inside threads. Wt. .93 lb. ea. #A60SS - Same as above only in aluminum. Wt. .28 lb. ea.
- Read more
-
- Uncategorized
- #60U – Universal Mounting Base
- This base can be used for vertical or horizontal mounting. Base is threaded for 3/8” inside threads. Made of bronze material for pastedown or fastening with screws for hammer drives. Wt. .80 lb. ea.
- Read more
-
- UNIVERSAL BASES
- #60UADP – Universal Adaptor
- Made of copper bronze, with 1/2” OD and 5/8” ID threads to use with 5/8” air terminal. Wt. .16 lb. ea.
- Read more
-
- FLAT MOUNTED BASES
- #60X – Bronze No-Nail Point Base
- with 3/8” inside and 5/8” outside threads with clamp type cable fastener. Wt. .96 lb. ea. * #A60X - Aluminum with 5/8” outside threads. Wt. .28 lb. ea. #60XB - Same as above with 1/2” inside threads. Wt. .86 lb. ea. #A60XB - Aluminum with 1/2” inside threads. Wt. .25 lbs. ea.
- Read more
-
- SADDLE BASES
- #64 – EZ-Fit Copper Saddle
- with finger type cable clamp. Wt. .66 lb. ea. #A64- Same as above only in aluminum. Wt. .30 lb. ea
- Read more
-
- SADDLE BASES
- #65DS EZ-Fit Copper Saddle Base
- with finger type cable clamp. #65W adapter for tube point must be purchased separately. Wt. .57 lb. ea.*
- Read more
-
- SADDLE BASES
- #66 – Anniversary Saddle
- 13” long with clamp type cable fastener. Wt. 1.14 lb. ea. #A66 - Same as above only in aluminum. Wt. .36 lbs. ea.
- Read more
-
- VERTICAL MOUNTED BASES
- #67B – Bronze Vertical Flat Surface Point Support
- with 1/2” inside thread and clamp style cable fastener. Wt. .78 lb. ea. * #A67B - Aluminum with 1/2” inside thread. Wt. .26 lb. ea. * #67C - Same as above with 3/8” inside thread. Wt. .60 lb. *. #67X - Same as above with 5/8” outside thread. Wt. .84 lb.* #A67X - Aluminum with 5/8” outside thread. Wt. .24…
- Read more
-
- SADDLE BASES
- #74 – Copper Improved EZ-Fit Saddle
- #74 - Copper Improved EZ-Fit Saddle with clamp type cable fastener. Cable and point fasteners made of copper bronze. Wt. .72 lb. ea. #A74 - Same as above only in aluminum. Wt. .32 lb. ea
- Read more
-
- SADDLE BASES
- #74Y – Copper No-Nail Paste Down Roof Saddle
- #74Y - Copper No-Nail Paste Down Roof Saddle with clamp type cable fastener. Wt. .70 lb. ea. #A74Y - Sames as above only in aluminum. Wt. .28 lb. ea
- Read more
-
- CONCEALED THRU-ROOF ASSEMBLIES
- #79A
- Note: Air terminals for above assemblies are purchased separately. Air terminals are full nickel plated. Bronze & Aluminum #79 - 10” Length #A85 - 16” Length #79A - 14” Length #A85A - 12” Length #85 - 16” Length #A85B - 10” Length #85A - 12” Length #85B - 10” Length
- Read more
-
- MISCELLANEOUS CONNECTORS
- #7W – 5/8” Copper Strip and Standard Cable T Connector.
- #7W - 5/8” Copper Strip and Standard Cable T Connector. Wt. .16 lb. ea. #A7W - Aluminum 5/8” Strip and Standard Cable T Connector. Wt. .04 lb. ea.
- Read more
-
- MISCELLANEOUS CONNECTORS
- #7X – 1” Strip and Standard Cable T Connector.
- One InchStrip and Flat Cable Connectors #7X - 1” Strip and Standard Cable T Connector. Wt. .18 lb. ea. #A7X - Aluminum 1” Strip and Standard Cable T Connector. Wt. .08 lb. ea.
- Read more
-
- BI-METAL CONNECTORS
- #A175 – Bimetal Connector-Disconnector
- It is very important when interconnecting aluminum and copper cables, that properly approved connectors be used to eliminate corrosion. An electro-chemical reaction will appear and corrosion will take place when these two dissimilar metals are in contact with each other, unless there is a sealed joint that will not permit moisture to enter. The connectors and splicers illustrated provide a…
- Read more
-
- BI-METAL CONNECTORS
- #A183 – Bimetal Bonding Plate
- It is very important when interconnecting aluminum and copper cables, that properly approved connectors be used to eliminate corrosion. An electro-chemical reaction will appear and corrosion will take place when these two dissimilar metals are in contact with each other, unless there is a sealed joint that will not permit moisture to enter. The connectors and splicers illustrated provide a…
- Read more
-
- BI-METAL CONNECTORS
- #A183X – Bimetal Connector
- It is very important when interconnecting aluminum and copper cables, that properly approved connectors be used to eliminate corrosion. An electro-chemical reaction will appear and corrosion will take place when these two dissimilar metals are in contact with each other, unless there is a sealed joint that will not permit moisture to enter. The connectors and splicers illustrated provide a…
- Read more
-
- BI-METAL CONNECTORS
- #A304A- Bimetal Aluminum to Copper “T” Splicer
- It is very important when interconnecting aluminum and copper cables, that properly approved connectors be used to elinimate corrosion. An electro-chemical reaction will appear and corrosion will take place when these two dissimilar metals are in contact with each other, unless there is a sealed joint that will not permit moisture to enter. The connectors and splicers illustrated provide a…
- Read more
-
- BI-METAL CONNECTORS
- #A304B – Bimetal Copper to Aluminum “T” Splicer
- It is very important when interconnecting aluminum and copper cables, that properly approved connectors be used to elinimate corrosion. An electro-chemical reaction will appear and corrosion will take place when these two dissimilar metals are in contact with each other, unless there is a sealed joint that will not permit moisture to enter. The connectors and splicers illustrated provide a…
- Read more
-
- BI-METAL CONNECTORS
- #A33D – Deluxe Bimetal Straight Splicer
- It is very important when interconnecting aluminum and copper cables, that properly approved connectors be used to elinimate corrosion. An electro-chemical reaction will appear and corrosion will take place when these two dissimilar metals are in contact with each other, unless there is a sealed joint that will not permit moisture to enter. The connectors and splicers illustrated provide a…
- Read more
-
- BI-METAL CONNECTORS
- #A34A – “T” Splicer
- It is very important when interconnecting aluminum and copper cables, that properly approved connectors be used to elinimate corrosion. An electro-chemical reaction will appear and corrosion will take place when these two dissimilar metals are in contact with each other, unless there is a sealed joint that will not permit moisture to enter. The connectors and splicers illustrated provide a…
- Read more
-
- BI-METAL CONNECTORS
- #A34B – “T” Splicer
- It is very important when interconnecting aluminum and copper cables, that properly approved connectors be used to elinimate corrosion. An electro-chemical reaction will appear and corrosion will take place when these two dissimilar metals are in contact with each other, unless there is a sealed joint that will not permit moisture to enter. The connectors and splicers illustrated provide a…
- Read more
-
- BI-METAL CONNECTORS
- #A41P – Bimetal Parallel Copper to Aluminum Splicer
- It is very important when interconnecting aluminum and copper cables, that properly approved connectors be used to elinimate corrosion. An electro-chemical reaction will appear and corrosion will take place when these two dissimilar metals are in contact with each other, unless there is a sealed joint that will not permit moisture to enter. The connectors and splicers illustrated provide a…
- Read more
-
- VERTICAL MOUNTED BASES
- #C90X – Bronze Point Base
- with 3/8” inside thread. Has clamp type cable fastener. Wt. .46 lb. ea. #AC90X - Aluminum with 1/2” inside thread. Wt. .16 lb. ea. #C90Y - Same as above with 1/2” inside thread. Wt. .50 lb. ea.
- Read more
-
- SADDLE BASES
- #F414 – Bronze Concealed Saddle
- 6-1/4” in length with 3/8” inside thread and adjustable clamp type cable fastener that will accommodate either standard flat or round cable. For vertical or horizontal runs. Can be furnished with 1/2” I.D. threads if specified. Wt. .32 lb. ea. #AF414 - Same as above only in aluminum with 1/2” I.D. threads. Wt. .14 lb. ea.
- Read more
-
- “T” TYPE CABLE CONNECTORS
- #G181 – Bronze Heavy Duty Three Way Connector
- #G181 - Bronze Heavy Duty Three Way Connector for 1/0 or 2/0 cables with bolt type cable connection used for “T” cable splice on roof and for connecting to counterpoise cable. Eliminates right angle connections. Connector has 8” of contact with horizontal cable and 4” of contact with vertical or branch conductor. Wt. 2.10 lb. ea. #AG181 - Aluminum Heavy…
- Read more
-
- SIDE BY SIDE CONNECTORS AND SPLICERS
- #G27
- #G27 - Bronze Large 4” All Purpose Connector with two stainless steel 3/8” bolts, nuts and washers and used for connecting two cables or rods through 2/0 or 5/8” dia. Wt. .86 lb. ea. * #AG27 - Aluminum Large 4” All Purpose Connector. Wt. .34 lb. ea. * #G28 - Bronze 2” All Purpose Connector with two stainless steel 3/8”…
- Read more
-
- BUS TERMINALS
- #G67 – Bronze Heavy Duty Bus Terminal
- #G67 - Bronze Heavy Duty Bus Terminal for connecting standard cables through 2/0 to flat metal surfaces. Wt. .28 lb. ea. #AG67 - Aluminum Heavy duty Bus Terminal. Wt. .12 lb. ea. #G68 - Bronze Small Bus Terminal for connecting No. 4 or No. 6 cable to small bodies of metal. Wt. .14 lb. ea. #AG68 - Aluminum Small Bus…
- Read more
-
- END TO END STRAIGHT CONNECTORS
- #G73 – Bronze Heavy Duty Four Screw
- #G73 - Bronze Heavy Duty Four Screw Cable Splicer for use in splicing 1/0 through 2/0 cables. Larger sizes available upon request. Wt. .66 lb. ea. #AG73 - Aluminum Heavy Duty Four Screw Cable Splicer. Wt. .24 lb. ea
- Read more
-
- CABLE GUARDS AND FASTENERS
- #G81 – Bronze Guard Fastener
- #G81 - Bronze Guard Fastener for use with 591, 3/4” Copper Guard Pipe. Bolt hole size is 5/16”. Wt. .06 lb. ea.
- Read more
-
- CONNECTORS, SPLICERS, FITTINGS, BONDING PLATES, ETC.
- #G88 – Bronze Extra Heavy Duty Large Bonding Plate
- #G88 - Bronze Extra Heavy Duty Large Bonding Plate, 6” x 4-1/2” x 3/8” thick. For standard cables through 2/0. For use when an extra heavy duty large bonding plate is required. 27 sq. inches of bonding surface. Wt. 1.24 lb. ea. #AG88 - Sames as above only in aluminum. Wt. .40 lb. ea. #G89 - Bronze Heavy Duty Large…
- Read more
-
- CONNECTORS, SPLICERS, FITTINGS, BONDING PLATES, ETC.
- #G95 – Bronze Large Heavy Duty Cross Run Connector
- #G95 - Bronze Large Heavy Duty Cross Run Connector with hexhead screws. Measures 4” x 4” and used for bonding standard cables through 2/0 to 1/2”, 5/8”, or 3/4” dia. ground rods at right angles. When ordering, please specify size of ground rod and cable. Wt. 1.22 lb. ea. #AG95 - Same as above only in aluminum. Wt. .40 lb.…
- Read more
-
- CONCEALED THRU-ROOF ASSEMBLIES
- 240A
- Notes: Air Terminals are purchased separately. Air terminals are fully nickel plated. Bronze Aluminum For 3/8” Threads For 1/2” Threads 240A - 10” Length A240W - 12” Length 240W - 12” Length For 1/2” Threads Note: Longer stems are 240Z - 12” Length available upon request.
- Read more
-
- MISCELLANEOUS CONNECTORS
- Cable and Section Rod Connectors
- Cable and Section Rod Connectors #9 - Section Rod Top Coupler. Wt. .24 lb. ea.
- Read more
-
- MISCELLANEOUS CONNECTORS
- Cable and Section Rod Connectors
- #10 - Female Cable and Section Rod End to End Coupler. Wt. .20 lb. ea. #11 - Male Cable and Section Rod End to End Coupler. Wt. .20 lb. ea.
- Read more
-
- GROUND PLATES AND CHARCOAL GROUNDS
- Copper Sheet Ground Plates
- The following ground plates are made of 20 gauge copper sheet stock. #587 - 18” x 36”. Wt. 6.75 lb. ea. #587A - 36” x 36”. Wt. 13.48 lb. ea. #588- 18” x 24”. Wt. 4.60 lb. ea. #589 - 18” x 18”. Wt. 3.125 lb. ea.
- Read more
-
- GROUND ROD CLAMPS
- Cross Run Cable and Ground Clamps
- #119 - Bronze Clamp for connecting 1/2” diameter cable to 1/2” diameter ground rod. Wt. .40 lb. ea. * #A119 - Same as above only in aluminum. Wt. .14 lb. ea. #119A - Bronze Clamp for connecting 5/8” diameter cable to 5/8” diameter ground rod. Wt. .46 lb. ea. #A119A - Aluminum Clamp for cross-connecting two aluminum cables. Wt. .16…
- Read more
-
- MISCELLANEOUS CONNECTORS
- Grounding to Counterpoise System
- Grounding to Counterpoise System Detail view displays #51 Ground rod clamp on ground rod with cable and #28U U bolt Clamp, connected to a simulated counterpoise ground system. #28U is not intended to be the primary connections but is used as a secondary clamp for connection between a ground rod and counterpoise. Use of a ground clamp is necessary to…
- Read more
-
- GROUND ROD CLAMPS
- Heavy Duty Ground Rod Clamp Made of Copper Bronze
- Heavy Duty Ground Rod Clamp Made of Copper Bronze #50A - 1/2” Clamp. Wt. .36 lb. ea. #51A - 5/8” Clamp. Wt. .42 lb. ea. * #52A - 3/4” Clamp. Wt. .52 lb. ea. * Above clamps fit standard cable through 2/0 with corresponding size ground rod as indicated.
- Read more
-
- MISCELLANEOUS CONNECTORS
- Metal Track Connectors
- Metal Track Connectors #4 - For Miniature copper Cable. Wt. .08 lb. ea. #A4 - For Miniature Aluminum Cable. Wt. .04 lb. ea. #5 - For Standard Copper Cable. Wt. .14 lb. ea. * #A5 - For Standard Aluminum Cable. Wt. .08 lb. ea. Note: Furnished with 5/16” or 7/16” holes.
- Read more
-
- GROUND ROD CLAMPS
- Standard Ground Rod Clamp Made of Copper Bronze
- #50 - 1/2” Clamp. Wt. .24 lb. ea. #51 - 5/8” Clamp. Wt. .30 lb. ea. #52 - 3/4” Clamp. Wt. .28 lb. ea. Above clamps fit standard cable through 2/0 with corresponding size ground rod as indicated.
- Read more
Products
This is where you can add new products to your store.
